DSTV Settings

To set up RLW TV on DSTV please follow the steps below:

How to set up RLW TV on your decoder

Go to Public IS/7 and follow the steps below:

1. Menu.
2. Advance Options.
3. Dish installation.
4. Scroll to Network 2.
5. Use left arrow and scroll/change to OTHER.
6. Press “OK” button.
7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
10.Scroll to 11 and press OK to accept the new settings.

Saving And Scan

11. Scroll to 9, SCAN ALL NETWORKS and press OK.

Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
After the scan is complete, you may access these NEW channels as follows:

13. Press TV button.
Use U/D arrows to scroll to “Public IS7″ and press OK

97 thoughts on “DSTV Settings

    • June 14, 2016 at 12:19 pm
      Permalink

      Could you please help with RLW settings, I have been trying to connect with the settings above but failed.

      Reply
    • August 24, 2016 at 5:19 pm
      Permalink

      Can you please assist me? I want to install public channels.

      Reply
      • September 2, 2016 at 1:09 pm
        Permalink

        Use this link “bit.ly/2bHHKFE” and follow the instructions.

        Reply
    • July 14, 2015 at 6:04 pm
      Permalink

      Code public channel for Dstv

      Reply
      • August 9, 2015 at 12:15 pm
        Permalink

        To set up RLW TV on DSTV please follow the steps below:

        How to set up RLW TV on your decoder

        Go to Public IS/7 and follow the steps below:

        1. Menu.
        2. Advance Options.
        3. Dish installation.
        4. Scroll to Network 2.
        5. Use left arrow and scroll/change to OTHER.
        6. Press “OK” button.
        7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
        8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
        9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
        10.Scroll to 11 and press OK to accept the new settings.

        Saving And Scan

        11. Scroll to 9, SCAN ALL NETWORKS and press OK.

        Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
        After the scan is complete, you may access these NEW channels as follows:

        13. Press TV button.
        Use U/D arrows to scroll to “Public IS7″ and press OK

        Reply
        • March 28, 2016 at 5:59 pm
          Permalink

          Theres a problem with Rlw tv since sunday and today,there is no sound only pictures and it happens most of the times. How about Rlw decoders? Thank u

          Reply
          • April 17, 2016 at 11:05 am
            Permalink

            Our technical team will work on it ASAP. Thank you very much.

        • January 14, 2017 at 11:58 am
          Permalink

          Can or will it be possible to do this on Explorer?

          Reply
      • May 6, 2016 at 12:11 pm
        Permalink

        Settings for FREE to Air Channels
        Menu-Advance Options-Dish installation…
        Network 2- DStv Is 20/7
        Frequency- 12522
        Symbol Rate- 27500
        FEC – 3/4
        Polarisation- Vertical
        Tune in to RLW TV and be Blessed!!!

        Reply
        • January 14, 2017 at 10:14 pm
          Permalink

          Thank you thank you and thank you,,,,,be blessed

          Reply
      • July 23, 2016 at 12:02 pm
        Permalink

        Public channels for explora

        Reply
    • March 7, 2016 at 4:56 pm
      Permalink

      Evening saints please help me RLW CHANNELS SETTING I have buy new Dstv. The old dstv I have channel new I strangled I used pin 9949 wrong pin thanks

      Reply
  • January 7, 2015 at 5:29 pm
    Permalink

    Mokgethwa!in those setting you’ve just mention I don’t have public si7 I only have that of 20 and it gives me problems because I can’t acces the public chanell especialy rlw tv please help out!thank you

    Reply
  • January 10, 2015 at 9:39 am
    Permalink

    I’m struggling to get the channel of RLW TV please help

    Reply
  • January 10, 2015 at 5:11 pm
    Permalink

    I did exactly as being said but it still refuses to open. Please help, I need to watch my Bishop.

    Reply
    • February 11, 2016 at 11:41 am
      Permalink

      I tried to set up this channel it doesn’t want to appear on public please help me I want to watch my archbishop

      Reply
    • April 17, 2016 at 10:35 pm
      Permalink

      Pls help me to set the public channels. I once did it and it worked nicely. It stopped working and now I am struggling to reset it. Pls help

      Reply
  • January 10, 2015 at 5:11 pm
    Permalink

    I did exactly as being said but it still refuses to open. Please help, I need to watch my Bishop Zondo.

    Reply
  • January 11, 2015 at 4:22 pm
    Permalink

    Good evening bakgethwa, could you please assist with settings for Dstv HD decoder or Dstv Explora.

    Thank you

    Reply
    • May 24, 2016 at 6:42 am
      Permalink

      I also need assistance with this new Hd decoder. RLW settings pls bakgethwa.

      Reply
      • October 9, 2016 at 1:19 pm
        Permalink

        DSTV Settings
        To set up RLW TV on DSTV please follow the steps below:

        How to set up RLW TV on your decoder

        Go to Public IS/7 and follow the steps below:

        1. Menu.
        2. Advance Options.
        3. Dish installation.
        4. Scroll to Network 2.
        5. Use left arrow and scroll/change to OTHER.
        6. Press “OK” button.
        7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
        8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
        9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
        10.Scroll to 11 and press OK to accept the new settings.

        Saving And Scan

        11. Scroll to 9, SCAN ALL NETWORKS and press OK.

        Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
        After the scan is complete, you may access these NEW channels as follows:

        13. Press TV button.
        Use U/D arrows to scroll to “Public IS7″ and press OK.

        Reply
    • February 26, 2017 at 5:20 pm
      Permalink

      HD/DSTV decoder public Chanel settings please.

      Reply
  • January 17, 2015 at 6:42 am
    Permalink

    Bakgethwa dumelang hle. I’m struggling with the settings and it’s really frustrating me because I feel I’m missing out on learning more from Bishop ka lentswe la Modimo. I follow the said steps but I’m not winning. Please hel hle…

    Reply
  • January 18, 2015 at 8:59 am
    Permalink

    Bazalwane please help ndise Eastern Cape I need settings for dstv explora it seems they are different from the normal dstv decoder. I’m really having dificult time without watching Bishop. Pleasse heeeelp

    Reply
  • January 18, 2015 at 11:02 am
    Permalink

    Please help as I am struggling to find the channel.
    I’m only getting IS20 on my DSTV.

    Thanking you in advance.

    Reply
    • March 29, 2015 at 11:38 am
      Permalink

      use IS20. It must work

      Reply
  • January 20, 2015 at 3:25 pm
    Permalink

    bakgetwa dumelang …..ke maatla nthwenah….i m struggling wit th settings bt my other option is to go and buy a public channels decoder ….

    Reply
    • November 26, 2015 at 9:01 am
      Permalink

      pplease help me with the public channels settings,i have new New Dstv HD4u decorder.thanx in advance

      Reply
      • June 29, 2016 at 8:18 pm
        Permalink

        Public channels settings on dstv #12722**,26657***,1/2**vertical |#12662**,26657 **, 2/3*,vertical
        #12562**,26656**,1/2 **, horizontal

        Reply
  • January 21, 2015 at 11:00 am
    Permalink

    Good Day

    Please assist with the settings how do we get to public IS/7″ before we start with the settings
    please we are missing out we need the Bishop I have tried the settings provided on the website its not going through.

    Thank you

    Reply
    • March 12, 2015 at 6:45 pm
      Permalink

      Dumelang Bakgethwa,ke mokgethwa Caroline Moeng, from ko Lehae, nna ke tswa ko multichoice, ba re re tlameha ho reka decocer ya di public broadcast hobane multichoice is loosing for paying out for the publics, so this means u buy a separate decoder and pay for them.

      Reply
  • January 26, 2015 at 7:07 pm
    Permalink

    Good evening

    I’ve currently just got the new dstv hd decoder and the settings described aren’t allowing me to watch RLW ministries channel. Please do provide me with assistance. I’m missing out on the Bishops sermons and many more.

    Thank you in advance.

    Reply
  • February 1, 2015 at 5:38 pm
    Permalink

    I used to have rlw TV settings n watching rlw TV channel everyday and nw the settings seems to be expired cause I can’t access the channel anymore,,, need the settings pls help

    Reply
  • February 3, 2015 at 3:31 pm
    Permalink

    Hello bakgetwa am struggling to find our channel can you pls assist I miss the teachings of my father

    Reply
  • February 6, 2015 at 9:22 pm
    Permalink

    Hi Bakgethwa, the setting start with menu, ignore the first sentence that says Go to public…and follow the steps below because the statement Go to Public is the end results after you have done the setting. Pls guys look into it maybe put at the end or rather say To go to public…, from where I am reading a lot of people are looking for Public …and they can’t find it. Instead of going to Menu…God bless you all

    Reply
  • February 16, 2015 at 11:19 pm
    Permalink

    Bazalwane, public is7 doesn’t work anymore, try to google settings for public is20 then you will be able to view rlwtv. . . The technical team will update the settings as soon as possible. Wearevery sorry for the inconvinience.

    Thank you.

    Reply
  • March 12, 2015 at 1:00 pm
    Permalink

    hi saints pls help me with the settings of rlw

    Reply
  • March 15, 2015 at 8:28 am
    Permalink

    Dumelang bakgetwa I’m using the HD 4u decoder and wen I set the settings for RLW it doesn’t work so plz help us we are in need for our channel and keep us updated on the setting speacially for the new HD decoders and explora people coz we really struggling and not used to the new decoder.GOD bless you all

    Reply
  • March 29, 2015 at 11:35 am
    Permalink

    Lets review this 29.03.2015
    To set up RLW TV on DSTV please follow the steps below:
    How to set up RLW TV on your decoder

    1. Menu.
    2. Advance Options.
    3. Dish installation.
    4. Reset to Factory Defaults
    Allow the Decoder to remove older settings and prepare for the new ones

    5. Do steps 1+2+3 and continue from here
    6. Scroll to Network 2. (or any other network, BUT not 1)
    7. Use left arrow and scroll/change to OTHER.
    8. Press “OK” button.
    9. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
    10. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
    11.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
    12.Scroll to 11 and press OK to accept the new settings.

    Saving And Scan
    13. Scroll to 9, SCAN ALL NETWORKS and press OK.

    Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime. After the scan is complete, you may access these NEW channels as follows:

    14. Press TV button.
    Use U/D arrows to scroll to “Public IS20″ and press OK
    You may now use the +/-channel until you get to RLW

    Reply
    • September 26, 2015 at 1:39 pm
      Permalink

      Thank you so much just downloaded it now thanks again

      Reply
    • April 15, 2016 at 8:58 am
      Permalink

      Yes you are correct these are the correct settings for the dsd decorders but people need help on settings for the 4 u hd decorder of which I also believe the settings are different on the two decorders,pliz help I also need the settings.

      Reply
  • March 30, 2015 at 4:43 pm
    Permalink

    Could you please help me with the dstv settings for rlw TV using is20

    Reply
  • June 16, 2015 at 2:38 pm
    Permalink

    Bakgwethwa, dusang. How To set RLW if the decorder is on IS20?

    Reply
  • July 10, 2015 at 8:04 am
    Permalink

    Good morning saint,
    kindly send me the settings for the PVR decoder because the one on this page do not correspond to the settings on the PVR decoder.

    kind regards

    Mr Tshabalala

    Reply
    • August 9, 2015 at 12:31 pm
      Permalink

      To set up RLW TV on DSTV please follow the steps below:

      How to set up RLW TV on your decoder

      Go to Public IS/7 and follow the steps below:

      1. Menu.
      2. Advance Options.
      3. Dish installation.
      4. Scroll to Network 2.
      5. Use left arrow and scroll/change to OTHER.
      6. Press “OK” button.
      7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
      8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
      9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
      10.Scroll to 11 and press OK to accept the new settings.

      Saving And Scan

      11. Scroll to 9, SCAN ALL NETWORKS and press OK.

      Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
      After the scan is complete, you may access these NEW channels as follows:

      13. Press TV button.
      Use U/D arrows to scroll to “Public IS7″ and press OK

      Reply
  • July 14, 2015 at 4:23 pm
    Permalink

    Trying install public kuyala ,may you please assist

    Reply
    • August 9, 2015 at 12:19 pm
      Permalink

      To set up RLW TV on DSTV please follow the steps below:

      How to set up RLW TV on your decoder

      Go to Public IS/7 and follow the steps below:

      1. Menu.
      2. Advance Options.
      3. Dish installation.
      4. Scroll to Network 2.
      5. Use left arrow and scroll/change to OTHER.
      6. Press “OK” button.
      7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
      8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
      9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
      10.Scroll to 11 and press OK to accept the new settings.

      Saving And Scan

      11. Scroll to 9, SCAN ALL NETWORKS and press OK.

      Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
      After the scan is complete, you may access these NEW channels as follows:

      13. Press TV button.
      Use U/D arrows to scroll to “Public IS7″ and press OK

      Reply
  • July 14, 2015 at 8:34 pm
    Permalink

    RLW saints, it is difficult to access RLW TV on HD decoder. May RLW Church prioritize the resolving of the issue as a matter of urgency. It is very frustrating. God bless.

    Reply
    • March 27, 2016 at 12:43 pm
      Permalink

      We understand your frustrations, though we have no control over DSTV equipment and their support for Public IS channels. Should there be any updates or settings we can assist all HD users with in the future, we will gladly inform you through our media platforms.

      Reply
      • July 23, 2016 at 4:25 pm
        Permalink

        SETTINGS FOR HD DECODER – Good day, those who have HD Decoders please Press the Blue DSTV button and Go to Settings, then go to Satellite Settings, then go to Additional Networks, then go to Network 2 and put the settings given to you above and then press Scan This not Scan All. After finishing Scanning then press the Blue DSTV button again and then go to Planner, then Press TV Guide, finally scroll to ALL CHANNELS and press ok, you will then see a list of channels , search for RLW , most of the public channels will be at the end after the radio channels, I hope I helped, stay blessed.

        Reply
        • November 10, 2016 at 10:16 pm
          Permalink

          Its true, after scan this it gives comments that only the installer accredited should do it, or the dstv representative. I then made a call to call centre for assistance , it was in vain as the official explained that multichoice encountered lot of problem with the public channel.

          Reply
        • February 18, 2017 at 2:04 pm
          Permalink

          where are the settings

          Reply
  • August 10, 2015 at 8:24 pm
    Permalink

    How do I access public channels? I have a dstv hd decoder and the listed instructions seems inapplicable. God bless. Thando.

    Reply
  • September 23, 2015 at 11:27 am
    Permalink

    my decoder is the new one DSTV HD is not the same with the old one even the remote control is different, how is set public in decoder HD

    Reply
  • October 6, 2015 at 2:05 pm
    Permalink

    Bana ba Modimo, some of us have these new HD Decoders. Please help us with the settings.

    Reply
  • November 17, 2015 at 10:40 am
    Permalink

    Hi ,my decod says the need pin code when i put the code dey sad the pin is blocked .any one wth a new pin or contact for customer service please help me .i mis to see my bishop. Please

    Reply
  • November 24, 2015 at 2:51 pm
    Permalink

    Hi Bakgethwa,, some of us have these new HD Decoders. Please help us with the settings

    Reply
  • December 10, 2015 at 6:12 pm
    Permalink

    I’m struggling to get the public channels pliz help..with is20

    Reply
  • February 8, 2016 at 11:46 am
    Permalink

    Good day, please can you help me to install the IS20 channels.

    Reply
  • April 4, 2016 at 4:55 pm
    Permalink

    Can u pls help me to install public channels via HD dicoder

    Reply
  • April 25, 2016 at 4:10 pm
    Permalink

    I am using this New HD 4U Decoder, I can’t even find MENU on my REMOTE. Please assist me with the settings. No advanced options on my DSTV, I can’t even find this PUBLIC CHANNELS. My Signal Strength is 70% and Signal Quality is 62%, can this affected my settings?

    Reply
  • May 4, 2016 at 11:20 am
    Permalink

    Press the BLUE DSTV button on your remote.
    Go to Settings
    Go to Satellite Settings > Additional Settings – press OK.
    Make sure the following codes are all the same on Network 2:
    Enable Network: Yes
    Use NIT: Yes
    Frequency: 12682
    Modulation: DVB-S
    Symbol Rate: 26657
    FEC: 2/3
    Polarisation: Horizontal
    Go to Scan This – press OK.
    Once scanning is complete press the BLUE DSTV button.
    Go to Planner
    TV Guide > All Channels – press OK.

    Reply
    • January 22, 2017 at 7:37 pm
      Permalink

      Hi Sylvester may i kindly have all the networks settings from 2-8

      Reply
    • February 12, 2017 at 4:00 pm
      Permalink

      I am using dstv explora and the signal strength is 0% and the signal quality is also 0% please help me

      Reply
    • May 9, 2017 at 3:44 pm
      Permalink

      Please help me ,when I want to download setting for DSTV HD , when i got scan this it just stopping what can I do now?

      Reply
      • June 2, 2017 at 1:43 pm
        Permalink

        Good Afternoon Sir/Mam I would advise you to follow the settings for the public channels rather downloading them.
        these are the settings they similar to HD settings if you still expierence problems please reply.

        RLW TV: DSTV Explora Settings

        Press a blue button on your remote (DSTV)
        Scroll down to Satellite Settings
        Go to Additional Networks
        Then on Network 1, Enable Network YES
        Use NIT – Yes
        Frequency – 12682
        Modulation – DVB-S
        Symbol Rate – 27500
        FEC – ¾
        Polarisation – Horizontal

        Then Scan this

        When you done, go back to your remote and select Options – Channel Group < All Channels >

        Reply
    • October 9, 2016 at 1:17 pm
      Permalink

      DSTV Settings
      To set up RLW TV on DSTV please follow the steps below:

      How to set up RLW TV on your decoder

      Go to Public IS/7 and follow the steps below:

      1. Menu.
      2. Advance Options.
      3. Dish installation.
      4. Scroll to Network 2.
      5. Use left arrow and scroll/change to OTHER.
      6. Press “OK” button.
      7. Scroll to 6, Freq and press OK, change values to 12722 and press OK.
      8. Scroll to 7, Symb and press OK, change value to 26657 and press OK.
      9.Scroll to 8, FEC use L/R arrows to change to 1/2 and press OK.
      10.Scroll to 11 and press OK to accept the new settings.

      Saving And Scan

      11. Scroll to 9, SCAN ALL NETWORKS and press OK.

      Your decoder will now attempt to find the satellites as per these settings and you have to give it sometime.
      After the scan is complete, you may access these NEW channels as follows:

      13. Press TV button.
      Use U/D arrows to scroll to “Public IS7″ and press OK.

      Reply
  • June 7, 2016 at 9:33 am
    Permalink

    I cant see to connect to the Public Channels. Lost conection since last week.
    Anyone with an idea as to why

    Reply
  • June 7, 2016 at 9:34 am
    Permalink

    I can’t see how to connect to the Public Channels. Lost conection since last week.
    Anyone with an idea as to why?

    Reply
  • June 12, 2016 at 1:57 pm
    Permalink

    Thank you very much bakgethwa, ke kgonne go seta channel ya bishop.

    Reply
  • August 11, 2016 at 5:05 pm
    Permalink

    Hi, I am using dsd 3u. How do I go about doing settings, because I have tried it multiple times and no luck. Thank you

    Reply
  • August 14, 2016 at 5:23 pm
    Permalink

    What should I do to be connected to RLW TV?

    Reply
  • October 18, 2016 at 3:49 pm
    Permalink

    I Have Technical Problem of sound, it gets stuck and I don’t know if its the place that I’m on or what, I’m in Greytown in Kwazulu-Natal Please assist Me on what I should Do.

    Reply
  • January 5, 2017 at 10:01 pm
    Permalink

    Aowa hlena bakgethwa am truly struggling with connection tried to follow all the instructions but failed thusang or ke lona letimona le ntlaisang lapeng?

    Reply
  • February 12, 2017 at 11:54 am
    Permalink

    Hi, kindly help with DSTV HD for your settings.

    Reply
  • February 26, 2017 at 1:47 pm
    Permalink

    Help me with the settings of DSTV HD please!

    Reply
  • April 20, 2017 at 11:47 am
    Permalink

    Do u have Explora settings?

    Reply
  • April 27, 2017 at 12:03 pm
    Permalink

    Hi there

    I was wondering if you assist me with the codes for dstv explora.

    Reply
    • June 2, 2017 at 2:00 pm
      Permalink

      try this.

      RLW TV: DSTV Explora Settings

      Press a blue button on your remote (DSTV)
      Scroll down to Satellite Settings
      Go to Additional Networks
      Then on Network 1, Enable Network YES
      Use NIT – Yes
      Frequency – 12682
      Modulation – DVB-S
      Symbol Rate – 27500
      FEC – ¾
      Polarisation – Horizontal

      Then Scan this

      When you done, go back to your remote and select Options – Channel Group

      Reply
  • May 16, 2017 at 5:14 pm
    Permalink

    Good day. Please help me to restore the public channel in the menu which just not displaying. My menu only end with the dot instead of public channel which is the last one on the menu of the decoder. Please help me Saints.

    Reply
    • June 2, 2017 at 1:35 pm
      Permalink

      Can you try this check if it works.
      RLW TV: DSTV Explora Settings

      Press a blue button on your remote (DSTV)
      Scroll down to Satellite Settings
      Go to Additional Networks
      Then on Network 1, Enable Network YES
      Use NIT – Yes
      Frequency – 12682
      Modulation – DVB-S
      Symbol Rate – 27500
      FEC – ¾
      Polarisation – Horizontal

      Then Scan this

      When you done, go back to your remote and select Options – Channel Group < All Channels >

      Reply
  • May 18, 2017 at 10:09 am
    Permalink

    Hello , Just wanted to find out once I have set up the public TV. Will it not destruct my normal DSTV channels and how do i go back to my normal channels? And if I want to cancel Public TV how do I do that?

    Reply
    • June 2, 2017 at 1:10 pm
      Permalink

      Good Afternoon Florence, public channels will not disrupt your normal channels.

      Reply
  • June 15, 2017 at 4:31 pm
    Permalink

    Hi good people can u please tell m what to do if I wanna do 1 on 1 session with Bishop.

    Reply
    • June 19, 2017 at 10:22 am
      Permalink

      Good Morning mam may you please contact:
      JHB 011 037 9600
      Evaton 016 582 1666

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *